DIN1142 Wire Rope Clip

Stainless Rope
Material Type: 304 Steel Wire Rope, 316 Steel Steel Rope and Galvanized Steel Wire Rope Sling Precautions for use:
(1) The Galvanized Wire Rope End should be buckled on the clamp seat on the working section of the wire rope, and the U-shaped bolts should be buckled on the end section of the wire rope. Wire rope clamps shall not be handed over on the wire rope.
Alternate arrangements.
(2) When the rope clamp is correctly arranged, the strength of the fixed part is at least 80% of the strength of the wire rope itself, and the nut should be loaded once or twice in actual use.
To be further tightened.
(3) The rope clip closest to the collar should be as close to the collar as possible. When tightening the rope clips, the reasonable force of each rope clip should be considered. Do not fasten the cord clip furthest from the collar alone first. .
(4) In order to facilitate joint inspection, another chuck can be installed about 500mm after the last chuck, and the rope end can be loosened into a "safety bend". when
When the joint wire rope slips, the "safety bend" is straightened, and measures should be taken immediately.
(5) When Galvanized Steel Turnbuckle hoops are used for reinforcement, horse-style hoops should be used as much as possible, and the inner clearance distance of "mine"-shaped bolts should be compatible with the diameter of the wire rope
It is not advisable to use large clamps to clamp the rope. The bolts must be tightened and pressed according to 1/3 of the diameter of the wire rope.
The above text introduces the wire rope clamp in detail. Wire rope clips seem to be very inconspicuous gadgets, but they are actually used in the operation of heavy industry
It is indispensable in this process, and the wire rope cannot play its corresponding role without it. Therefore, it is necessary to correctly locate it and understand its usage rules.
Fans are important. Finally, the editor reminds everyone to read the above text carefully, and it is essential before operating
Preparation work, if the wire rope clamp is not fixed, the work cannot proceed.